Cmod S7: Breadboardable Spartan-7 FPGA Module

The Digilent Cmod S7 is a small, 48-pin DIP form factor board populated with 36 pins and built around a Xilinx Spartan-7 FPGA. The 32 FPGA digital I/O signals, 2 FPGA analog input signals, an external power input rail, and ground are routed to 100-mil-spaced through-hole pins, making the Cmod S7 well-suited for use with solderless breadboards. At just 0.7” by 3.05” inches, it can be loaded in a standard socket and used in embedded systems. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, LEDs, and buttons. 

Key Features

• Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)
  • 3,650 slices containing four 6-input LUTs and 8 flip-flops
  • 1,620 Kbits of fast block RAM
  • Three clock management tile, each with a phase-locked loop and mixed-mode clock manager
  • 80 DSP slices
  • Internal clock speeds exceeding 450 MHz
  • On-chip analog-to-digital converter (XADC)
  • Programmable over JTAG and Quad-SPI Flash
• Memory
  • 4 MB Quad-SPI Flash
• Power
  • Powered from USB or 5V external supply connected to DIP pin 24 (micro USB cable NOT included)
• USB
  • USB-JTAG programming circuitry
  • USB-UART bridge
  • Push-buttons and LEDs
  • 2 Buttons
  • 4 LEDs
  • 1 RGB LED
• Expansion Connectors
  • 1 Pmod connector
    • 8 total FPGA I/O
• 48-pin DIP form-factor headers
  • 36 populated pins
    • 32 total FPGA I/O
    • 2 Single-ended 0-3.3V analog inputs to XADC

Scope of Delivery

• 1 x Cmod S7 Spartan-7 FPGA board in a Digilent cardboard packaging with protective foam inserts

References

• Manufacturer: Digilent Inc.
• Manufacturer's article name: Cmod S7: Breadboardable Spartan-7 FPGA Module
• Manufacturer's article code: 410-376

Resources

• Product page at Digilent Inc.
• Digilent Inc. Support Forum