Reyax
RYS8838
3.3V UART interface GNSS module with Untethered Dead Reckoning (UDR)
Item number VAR-827001977
Manufacturer Product Number: RYS8838
Taric/custom code: 85177900
Available for immediate dispatch: ${ $store.getters.currentItemVariation.stock.net }
Expected dispatch delay beyond available stock: 2 to 4 weeks
Item located in and dispatched from: Riedlingen, Germany
EUR 19.95
*
Content
1 piece
Log in and get better prices. Or contact us and request B2B status.
* Excl. VAT excl. Shipping
Description
The RYS8838 is a multi-GNSS module with high sensitivity, fast acquisition engine and an Untethered Dead Reckoning (UDR) function.
◆ SONY CXD5608AGF Engine.
◆ A multi-GNSS module for GPS(L1 C/A), GLONASS(L1 OF), SBAS(L1 C/A), QZSS(L1 C/A), BeiDou(B1 TBD) and Galileo(E1 CBOC TBD).
◆ Including SAW filter, LNA and TCXO.
◆ Embedded digital noise filters and spectrum analyzer.
◆ Untethered Dead Reckoning (UDR) function.
Item ID | 101662 |
Condition | New |
Model | RYS8838 |
Manufacturer | Reyax |
Manufacturing country | Taiwan |
Content | 1 piece |
Weight | 150 g |
Net weight | 100 g |
Dimensions | 13×11×3mm |
Customs tariff number | 85177900 |
Features
Item | Min. | Typical | Max. | Unit | Condition |
---|---|---|---|---|---|
Power Supply Voltage | 3.2 | 3.3 | 3.4 | V | VDD |
GNSS continuous mode
Item | Min. | Typical | Max. | Unit | Condition |
---|---|---|---|---|---|
Satellite acquisition Current | 19 | mA | |||
Satellite tracking Current | 13 | mA | |||
Idle Current | 3 | mA | Waiting for command | ||
Sleep2 mode current | 0.2 | uA | |||
Satellite acquisition Current | 11.5 | mA | Use buck regulator | ||
Satellite tracking Current | 8.2 | mA | Use buck regulator | ||
Idle Current | 2.6 | mA | Use buck regulator | ||
Sleep0 mode current | 0.5 | uA | Use buck regulator | ||
Sleep1 mode current | 0.17 | uA | Use buck regulator | ||
Sleep2 mode current | 0.17 | uA | Use buck regulator |
GNSS low power mode
Item | Min. | Typical | Max. | Unit | Condition |
---|---|---|---|---|---|
Satellite tracking average current | Use buck regulator @GSOP command Sleep1 and normal mode cycle | ||||
Default Baud Rate | 115200 | bps | 8,N,1 | ||
Digital input level high | 0.7*VDD | VDD+0.3 | V | VIH | |
Digital input level low | -0.3 | 0.3*VDD | V | VIL | |
Digital output level high | 0.8*VDD | VDD | V | VOH 2mA | |
Digital output level low | 0 | 0.2*VDD | V | VOH 2mA | |
GNSS Center Frequency | 1561.098 1575.42 1602.5625 | MHz | BeiDou GPS Glonass | ||
Navigation update rate | 1 | Hz | |||
Accuracy | 1 | M | Signal strength is -130dBm | ||
Cold starts | 35 | Sec. | Signal strength is -130dBm | ||
Hot starts | 2 | Sec. | |||
Tracking Sensitivity | -161 | dBm | |||
Hot starts Sensitivity | -160 | dBm | |||
Operating Temperature | -40 | 25 | +85 | ˚C | |
Dimensions | 13mm*11mm*2.2mm | ||||
Weight | 0.8 | g |