Trenz Electronic GmbH
FPGA Module with Xilinx Kintex-7 XC7K325T-2IF, 4 x 5 cm standard footprint (TE0741-04-D2I-1-A)
AMD/Xilinx Kintex 7 XC7K325T-2FBG676I, 32 MByte QSPI Flash, 8 High Speed Transceiver, Größe: 4 x 5 cm
Artikelnummer VAR-827001472
Hersteller-Teilenummer: TE0741-04-D2I-1-A
Taric/custom code:
Artikel befindet sich in und wird versendet von: Riedlingen, Deutschland
This product is offered at a discount because there is already a successor.
Only valid while stocks last!
The predecessor of this article is TE0741-03-325-2IF. All changes are in the Product Change Notification (PCN).
The successor of this article is TE0741-05-D2I-1-A. All changes are in the Product Change Notification (PCN).
The Trenz Electronic TE0741-04-D2I-1-A is an industrial-grade FPGA module integrating a AMD/Xilinx Kintex™ 7 325T FPGA, 8 MGTs (Multi Gigabit Transceivers) and 32 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via rugged high-speed stacking strips.
All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.
All parts are at least industrial temperature range of -40°C to +85°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.
Key Features
- AMD/Xilinx Kintex™ 7 FPGA XC7K325T-2FBG676I
- 256 MBit (32 MByte) Quad-SPI Flash memory (for configuration and operation) accessible through:
- FPGA
- JTAG port (SPI indirect)
- 8 MGTs (multi gigabit transceivers)
- FPGA configuration through:
- JTAG (B2B connector)
- SPI Flash memory
- 25 MHz low jitter oscillator with shutdown control
- Programmable quad clock generator (Silicon Labs Si5338)
- On-board high-efficiency DC-DC converters
- MGT voltage regulators with control enable
- Core voltage regulators: up to 30 A (variants depend)
- Supply voltages: either 3.3 V or 3.3 V and 5 V
- Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
- Up to 144 (94 for 70T) single-ended FPGA I/O pins available on B2B strips
- 2 x user LEDs, 1 x DONE FPGA pin LED
- AES bit-stream encryption
- Evenly spread supply pins for good signal integrity
Other assembly options for cost or performance optimization plus high volume prices available on request.
Recommended Software
Vivado ML Enterprise Edition
Development Support
There are different base boards available for this module.
Latest documentation, design support files and reference designs with source files are available for download free of charge.
Scope of Delivery
- 1 x TE0741-04-D2I-1-A Trenz Electronic 4 x 5 cm FPGA module with AMD/Xilinx Kintex™ 7 325T
- 8 x screws
- 4 x bolts
Additional Information
- Manufacturer's article number: TE0741-04-D2I-1-A
- Trenz Electronic TE0741 Wiki
- Samtec LSHM Razor Beam, High-Speed Hermaphroditic Terminal/Socket Strips, regular 4 mm,
overview, compatibility, mating heights and speed rating: Wiki, mounted on every 4 x 5 cm module of Trenz Electronic - Support Forum
All modules produced by Trenz Electronic are developed and manufactured in Germany.
The online pictures of this product are not a legally binding offer, but are symbol pictures for illustration and presentation only.
| Art.-ID | 101250 |
| Zustand | Neu |
| Legacy item ID | 3446 |
| Modell | TE0741-04-D2I-1-A |
| Hersteller | Trenz Electronic GmbH |
| Herstellungsland | Deutschland |
| Inhalt | 1 Stück |
| Gewicht | 67 g |
| Netto-Gewicht | 67 g |
