Trenz Electronic GmbH

Carrier board for TEM0007 Microchip PolarFire SoC module  (TEB2000-01-T001)

The carrier board may only be used in conjunction with the TEM0007.


Artikelnummer VAR-827003115

Hersteller-Teilenummer: TEB2000-01-T001

Taric/custom code:


Verfügbar für sofortigen Versand: 0

Ausführungsfristen 3 Tage. Für Bestellungen mit einem Gesamtnettowert von weniger als 70 Euro berechnen wir eine Bearbeitungsgebühr von 15 Euro.

Artikel befindet sich in und wird versendet von: Riedlingen, Deutschland


174,00 EUR *
Inhalt 1 Stück
Loggen Sie sich ein und erhalten Sie bessere Preise. Oder kontaktieren Sie uns und fragen Sie nach dem B2B-Status .

* Exkl. MwSt. exkl. Versandkosten

The Trenz Electronic TEB2000 carrier board provides functionality for development, evaluation and testing purposes of Trenz 4 x 5 cm SoMs (System on Module).

The carrier board is equipped with a broad range of various components and connectors for different configuration setups and needs. On-module functional components and multipurpose I/Os of the SoM's logic are connected via board-to-board connectors to the carrier board components and connectors for easy user access.

See page "4 x 5 cm carriers" to get information about the SoMs supported by the TE0703 carrier board.

Key Features

  • On Board
    • System Controller (SC) (LCMXO2-1200HC-4TG144I1))
    • Mini USB for JTAG and UART connection (FTDI FT2232H)
    • Mini USB second UART connection (FTDI FT230XQ)
    • SDIO port expander
    • 4 x User LEDs
      • D1, D2 connected to SC (firmware-dependent functionality)
      • D3, D4 connected to SC and 4 x 5 SoM
    • 2 x User push button
      • Connected to SC (firmware-dependent functionality)
      • Currently used for Hard- and Soft-Reset
    • 4 User DIP switches
      • Enable/disable update of the SC
      • MIO0 (accessible signal by SC and SoM)
      • 2 "mode" bits

  • Interface
    • Trenz 4 x 5 SoM socket
      • 3 x Samtec LSHM series high-speed connectors
    • Micro SD card connector
    • 2 x VG96 backplane connectors assembly option (mounting holes and solder pads)
    • Mini or Normal USB for SoM USB-OTG connection (depends on assembly variant)
    • RJ45 GbE connector

  • Power
    • Overvoltage-, undervoltage- and reversed- supply-voltage-protection
    • Barrel jack (2.1 mm) for 5V power supply input

  • Size
    • 10 x 6.45 cm

Scope of Delivery

  • 1 x TEB2000-01-T001 Carrier board for TEM0007 Microchip PolarFire SoC module 

Note: VG96 Connector vertical (article 21545), Harting DIN41612 (female) is not included in the scope of delivery, but can be purchased as an accessory in the shop.

Info: M2.5x8 mm screws and M2.5 galvanized nuts are required for mounting the VG96 connector.

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Art.-ID 102663
Zustand Neu
Legacy item ID 3941
Modell TEB2000-01-T001
Hersteller Trenz Electronic GmbH
Herstellungsland Deutschland
Inhalt 1 Stück
Gewicht 800 g
Netto-Gewicht 800 g